This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables.

The cartridge offers excellent channel separation and low distortion for outstanding tonal quality.

The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws - no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. 

Key Features
- VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus
- VM dual magnet construction
- Aluminium cantilever
- Durable low-resonance polymer housing
- Threaded inserts - can be mounted to headshell with just two screws
- Compatible with any AT-VMN95 replacement stylus
- Includes mounting hardware


    Moving Magnet (MM)

    The AT-VM95ML is equipped with dual moving magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response.

    Microlinear stylus

    The Microlinear stylus features low distortion even on the inner circumference of a record because the curvature radius of the stylus tip does not alter even if the stylus becomes worn.



    Frequency Response: 20 to 25,000 Hz
    Channel Separation: 23 dB (1 kHz)
    Output Channel Balance: 1.5 dB (1 kHz)
    Output Voltage: 3.5 mV (at 1 kHz, 5 cm/sec)
    Vertical Tracking Angle: 23 degrees
    Vertical Tracking Force: 1.8-2.2g (2.0g standard)
    Stylus Construction: Nude Square Shank
    Stylus Shape: Microlinear 2.2 x 0.12 mil
    Cantilever: Aluminium pipe
    Coil Impedance: 3.3 k ohms (1 kHz)
    Coil Inductance: 550 mH (1 kHz)
    Recommended Load Impedance: 47,000 ohms
    Recommended Load Capacitance: 100 to 200 pF
    Cartridge Weight: 6.1g
    Dimensions: 17.2mm H x 18.9mm W x 28.3mm D
    Mount: Half-inch
    Replacement Stylus: AT-VMN95ML. Also compatible with any AT-VMN95 replacement stylus

    - Two 11mm installation screws
    - Two 8mm installation screws
    - Two washers
    - Non-magnetic screwdriver 


    Popular Products

    Back to Top