This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV.

It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.



  • VM95 Series dual magnet cartridge with 0.6 mil conical stylus
  • Aluminium cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus



Frequency Response
20-20,000 Hz

Channel Separation
18 (dB at 1 kHz)

Vertical Tracking Force
1.8-2.2g (2.0g standard)

Stylus Construction
Bonded round shank

Recommended Load Impedance
47,000 ohms

4.0 mV (1 kHz, 5 cm/sec.)

Channel Balance
2.5 dB (1 kHz)

Stylus Shape
Stylus Shape

Aluminium pipe


Replacement Stylus

Coil Impedance
3.3 k ohms (1 kHz)

DC Resistance
485 ohms

Load Capacitance
100 to 200 pF

Coil Inductance
550 mH (1 kHz)

Vertical Tracking Angle

17.2mm H × 18.9mm W × 28.3mm D

6.1 g

Accessories Included:
Two 11mm installation screws, two 8mm installation screws, two washers


Popular Products

Back to Top