Olympica II Black Speakers + C48 + MC302 + MCT450 Pack

McIntosh Sonus Faber Pack. One-off opportunity, please call to book a time for a personal audition. Olympica II Black Speakers Few speakers are...

Go to the review section

✔ FREE Delivery for orders $500 or over
   **Conditions apply. Call showroom for details.

✔ FREE in-store pickup

✔ Authorised Retailer

  • Olympica II Black Speakers + C48 + MC302 + MCT450 Pack
  • Olympica II Black Speakers + C48 + MC302 + MCT450 Pack
  • Olympica II Black Speakers + C48 + MC302 + MCT450 Pack
  • Olympica II Black Speakers + C48 + MC302 + MCT450 Pack

AU $35,000.00
 

Order Now for FREE Shipping Australia-wide
**Conditions apply

We currently have 1 in stock.

McIntosh Sonus Faber Pack.

One-off opportunity, please call to book a time for a personal audition.

Olympica II Black Speakers

Few speakers are able to combine such a brilliant balance of technical innovation and quintessential style.

The Olympica II has a 29mm dome Tweeter containing Damped Apex Dome (DAD), derived from the development of Aida – one of Sonus faber’s leading systems.

It has a totally Sonus faber designed 150mm ultra dynamic linearity midwoofer. CCAW wire is used on a composite former "eddy current free" voice coil. The dynamically linear magnetic field motor incorporates triple Kellog/Goeller rings. A special custome diaphragm is made with a real time air dried non pressed blend of traditional sellulose pulp, kapok, kenaf and other natural fibers, developed according to the most natural sound. To further inhibit any residual cone coloration we are using a transparent viscous surface damping coating. Special coaxial anti-compressors is used, designed to remove cavity resonance and distortions.

There is a non-resonant "progressive slope" design, optimized amplitude/phase response for optimal space/time performance. "Paracross topology" on both tweeter hi-pass and midwoofer low pass, cross-over points 250 hz - 2.500 Hz.

FEATURES:

  • Loudspeaker System: 3 way standmount, paralaminar stealth flow vented loudspeaker
  • Cabinet: Enhanced "Lyre shape" design, progressive thickness triple curvature cabinet walls damped spread resonance spectrum system. Solid walnut vertical clamps
  • Tweeter: Sonus faber "Arrow Point" Damped Apex Dome (DAD). A Sonus faber designed 29mm moving coil driver. The ultra dynamic linearity is given by the new Neodymium motor system
  • Midrange: Sonus faber designed 150mm ultra dynamic linearity midwoofer
  • Cross-over points: 250 hz - 2.500 Hz
  • Frequency Response: 40 Hz - 30.000 Hz
  • Sensitivity (2.83V/1m): 88 dB SPL
  • Nominal impendence: 4 ohm
  • Suggested Amplifier Power Output: 50W – 250W without clipping
  • Long-term max input voltage (iec-268-5): 20V rms
  • Dimensions HxWxD (mm): 1055x370x472
  • Finish: Piano Black

C48 Pre-Amplifier

With unprecedented flexibility and control, C48 redefines what a value preamp should be. Moving coil and Moving Magnet Phono sections combine with assignable digital inputs in the perfect blend of traditional and contemporary music sources. In C48 Dedicated USB input allows access to computer sourced music. Five band programmable tone controls allow personalized music correction. McIntosh C48 Audio Preamplifier ranks you at the very top among discriminating music listeners.

Electronic Specifications

  • ULTRA LOW DISTORTION: 0.002%
  • FREQUENCY RESPONSE, +0, -3DB: 15Hz to 100,000Hz
  • VOLTS OUT, BALANCED / UNBALANCED MAX: 16/8 V RMS
  • INPUT IMPEDANCE BALANCED / UNBALANCED: 44K ohm, 22K ohm
  • PHONO VOLTAGE GAIN: 60dB
  • HIGH LEVEL VOLTAGE GAIN: 15dB
  • SIGNAL TO NOISE RATIO: 100dB
  • DUAL MONO POWER SUPPLY: No
  • DUAL MONO, FULLY BALANCED: No

Connectivity

  • HEADPHONE OUTPUT: Yes 1/4"
  • INPUTS UNBALANCED: 6 Stereo + 2 Phono
  • INPUTS BALANCED: 2 Stereo
  • VARIABLE OUTPUTS UNBALANCED: 2 Stereo
  • VARIABLE OUTPUTS BALANCED: 2 Stereo
  • DIGITAL USB INPUT: One, 2.0, 32/192 Asynchronous
  • DIGITAL SPIDIF INPUTS: 2-opt., 2-coax, 24/192
  • PHONO MOVING MAGNET: Yes, adjustable
  • PHONO MOVING COIL: Yes, adjustable
  • RECORD PROCESSOR LOOP: No
  • INPUT LEVEL MATCH: Yes, +/- 6dB
  • HOME THEATER PASS THROUGH: Yes

Control

  • TONE CONTROLS: Yes, 5 band
  • TONE BYPASS AND INPUT ASSIGN: Yes
  • RS232 CONTROL INPUT: Yes, 9 pin
  • POWER CONTROL OUTPUT: 1 Main, 1 ACC, 2 Switched
  • REAR PANEL DATA PORTS: Yes, 8
  • REAR PANEL IR SENSOR INPUT: Yes

General Specifications

  • MULTI-CHASSIS OR SINGLE: Single, two layer
  • OUTPUT METERS: No
  • TUBE OR TRANSISTOR: Transistor
  • ON, POWER CONSUMPTION: 30 watts

Weights & Dimensions

  • DIMENSIONS (W X H X D): 17.5" (44.45cm) x 6" (15.24cm) x 18" (45.72cm)
  • WEIGHT: 26.5 lbs (12.0 kg)
  • SHIPPING WEIGHT: 41 lbs (18.6 kg)

 

MC302 Power Amplifier

Power Amplifier

MC302 features classic McIntosh amplifier styling combined with advanced audio performance. Larger easier to read Watt Meters, New Style Mcintosh engineered binding posts and the latest advancements in circuit design combine to make MC302 the Value McIntosh amplifier. The MC302 Power amplifier has continuous average power output rating of 300 watts per channel, with a peak output current of 60 amperes.

Electronic Specifications

  • POWER OUTPUT PER CHANNEL: 300W @ 2, 4 or 8 Ohms
  • NUMBER OF CHANNELS: 2
  • THD: 0.005%
  • S/N BELOW RATED OUTPUT: 122dB
  • DYNAMIC HEADROOM: 1.8dB
  • DAMPING FACTOR: >40 Wideband
  • RATED POWER BAND: 20Hz to 20kHz
  • FREQUENCY RESPONSE +0,-0.25DB: 20Hz to 20kHz
  • FREQUENCY RESPONSE -3DB: 10Hz to 100kHz

Control

  • REMOTE POWER CONTROL: Yes
  • MULTI CHANNEL DB25 CABLE: N/A

General Specifications

  • CIRCUIT CONFIGURATION: Push-Pull Complementary
  • CIRCUIT DESIGN: Transistor
  • MONO BRIDGE: No
  • MONO PARALLEL: No
  • AUTOFORMER: Yes
  • METERS: Yes
  • METER LIGHT SWITCH: Yes
  • BALANCED INPUT: Yes
  • FRONT PANEL: Glass
  • ILLUMINATION: LED Fiber Optic
  • CHASSIS STYLE: Open Stainless Steel
  • GOLD PLATED BINDING POSTS: Yes, New Style McIntosh

Weights & Dimensions

  • DIMENSIONS (W X H X D): 17-1/2" (44.45cm) x 9-7/16" (23.97cm) (including feet) x 22" (55.88cm) (including front panel, knobs and cables)
  • WEIGHT: 98 lbs (44.45 kg)
  • SHIPPING WEIGHT: 131 lbs (59.42 kg)

 

MCT450 CD / SACD Transport

 

Get the most from your CDs with the MCT450 SACD/CD Transport

The MCT450 can be paired with any McIntosh product that contains digital inputs. This includes select home theater processors, integrated amplifiers and preamplifiers. Digital balanced, coaxial, optical and DIN outputs are available, giving you flexibility in connecting the MCT450 to the rest of your system. For SACDs, the unique DIN output connects to select McIntosh models with a DIN input - such as the C52​, C47​ or D150​ preamps - to deliver the purest possible sound quality. 

All common disc types are compatible with the MCT450, including SACD, CD, CD-R, and CD-RW (MP3 and WMA). A twin laser optical pickup assures optimal disc reading while 2x read speed provides better reading of damaged CDs and CD-R/RWs. Your discs are carefully handled by a premium aluminum die cast CD tray. Power control and data ports simplify the MCT450's operational state from other McIntosh system components. The entire unit is housed in a classic McIntosh styled, polished stainless steel chassis with a black glass front panel and brushed aluminum end caps.

SPECIFICATIONS:

AUDIO SPECIFICATIONS

NUMBER OF CHANNELS
2
ANALOG AUDIO OUTPUTS
0
FIXED OUTPUT LEVEL
N/A
VARIABLE OUTPUT LEVEL
N/A
OUTPUT IMPEDANCE
N/A
FREQUENCY RESPONSE
N/A
SIGNAL TO NOISE RATIO
N/A
DYNAMIC RANGE
N/A
TOTAL HARMONIC DISTORTION
N/A
CHANNEL SEPARATION
N/A
HEADPHONE OUTPUT IMPEDANCE
N/A


DIGITAL AUDIO SPECIFICATIONS

COAXIAL SAMPLE RATE
N/A
OPTICAL SAMPLE RATE
N/A
XLR SAMPLE RATE
N/A
BNC SAMPLE RATE
N/A
USB SAMPLE RATE
N/A
DIGITAL COAXIAL INPUT
N/A
DIGITAL OPTICAL INPUT
N/A
DIGITAL XLR INPUT
N/A
DIGITAL BNC INPUT
N/A
DIGITAL USB INPUT
N/A
DIGITAL OUTPUT SAMPLE RATE
Coaxial: Up to 24-Bit/96kHz
Optical: Up to 24-Bit/192kHz
XLR: Up to 24-Bit/192kHz, Up to 32-Bit/96kHz
DIGITAL COAXIAL OUTPUT
0.5V p-p/75 ohms
DIGITAL OPTICAL OUTPUT
-15dbm to -21dbm
DIGITAL XLR OUTPUT
5V p-p/150 ohms
DIGITAL BNC OUTPUT
N/A
DIGITAL DIN OUTPUT
3V @110 ohms


CONNECTIVITY

FIXED OUTPUTS UNBALANCED
0
FIXED OUTPUTS BALANCED
0
VARIABLE OUTPUTS UNBALANCED
0
VARIABLE OUTPUTS BALANCED
0
DIGITAL COAXIAL INPUT
0
DIGITAL OPTICAL INPUT
0
DIGITAL XLR INPUT
0
DIGITAL BNC INPUT
0
DIGITAL USB INPUT
0
DIGITAL COAXIAL OUTPUT
1
DIGITAL OPTICAL OUTPUT
1
DIGITAL XLR OUTPUT
1
DIGITAL BNC OUTPUT
0
DIGITAL DIN (SACD) OUTPUT
1


CONTROL

REAR PANEL IR SENSOR INPUT
Yes
REAR PANEL DATA INPUT
Yes
POWER CONTROL INPUT
Yes
POWER CONTROL OUTPUT
Yes


GENERAL SPECIFICATIONS

DISC FORMATS
SACD, Hybrid SACD, CD, CD-R/RW (MP3 and WMA)
DISC CAPACITY
1
LASER TYPE
Twin Beam
LASER BEAM WAVELENGTH
650nm (SACD)
790nm (CD)
LASER POWER
CLASS IIa/CLASS I
STANDBY POWER REQUIREMENT
<0.5 watt


WEIGHTS & DIMENSIONS

DIMENSIONS (W X H X D)
17-1/2" (44.45cm) x 6" (15.24cm) x 19" (48.3cm) Note: When the Disc Tray is opened, the panel clearance required in front of mounting panel is 6-3/4 inches (17.2cm).
WEIGHT
26 lbs (11.8 kg)
SHIPPING WEIGHT
40.5 lbs (18.4 kg)


Related Products


Back to Top