When power voltage fluctuates electrical equipment suffers.

The HLVD is designed to automatically detect a problem then offer shutdown protection until the danger subsides. Once the voltage returns to a safe level then the HLVD automatically re-activtes power to the circuit. The protection is against both high and low voltage incidents.The HLVD has an inbuilt factory delay of 3 minutes this is primarily because it is designed to protect electric motors, refrigeration and air-conditioing compressors from burning out or blowing up. If a compressor is under load and the power is turned on/off quickly this action can cause a compressor irrepairable damage. If an electric motor is supplied low voltage for a period of time this type of supply can cause the motor to burn out.

The HLVD will allow power to pass through as long as the voltage supply is above 190V (low) or below 270V (high). Should the voltage move out of the predefined "safe" window then the HLVD reacts by offering shutdown protection and cutting supply until the voltage supply returns to the "safe" level. If the power moves in and out of the "safe" level then each incident resets the on board clock count down to reactivation, this feature prevents damage occuring when voltage is unstable or erratic.

The delay can be reduced down to seconds or increased if need be. An example of reducing the delay could be applied to applications where equipment is not pressurised or does not require any lengthy delay. An example would be a lighting circuit, in this example the lights may become damaged if there is too much voltage going through and the HLVD would be a great option to protect the circuit. Other applications may be control equipment or PLC's, printing presses, commercial kitchen equipment, office printers, photocopiers, dishwashers, fridges, freezers, dryers etc.


  • High/Low Voltage Detector
  • 3 minute (factory set) delay
  • 20 Amp Din Rail Mount
  • 100% Australian Made


  • Supply Voltage 240Vac 50/Hz
  • Maximum Current Rating 20amps/4800 W (Va)
  • Reaction Speed 800 m/secs
  • Detection Voltage 190v to 270v
  • Delay 180 seconds (3 minutes)
  • LED (combination) Green = OK Orange = delay mode Red (slow flash) = high voltage detected Red (fast flash) = low voltage detected
  • Reset Delay override
  • Housing High temp/High impact Polycarbonate Housing Din rail Mount
  • Operating conditions Indoor/AC Mains
  • Operating Temperature -10 °C/+60 °C
  • Model Number HLVD 20 Amp

Related Products

Back to Top